January 20, 2012 - Colorado Springs, CO
Portable table-top
sized Vacuum Generator released by R-JetTek
Colorado Springs,
Colorado, January 20, 2012 -
The Colorado based Company R-JetTek has announced
the release of a new Vacuum Generator, Part #6010.
The Vacuum
Generator utilizes air from an air compressor and
converts it into a vacuum via a Venturi valve inside
the Vacuum Generator unit.
The device was
designed to pair with the EasyFill-M1, a tank
cartridge refilling tool that uses vacuum to produce
negative pressure inside the cartridge, thus pulling
the ink into the cartridge. Previously this was
accomplished by manually pulling on a syringe to
create the needed vacuum in order to properly
operate the M1.
The Vacuum
Generator replaces this manual operation reducing
hand fatigue and turning the M1 into a more
productive tool. In addition, with the additional
purchase of R-JetTek’s Hand Wand, the Vacuum
Generator can be used for countless other tasks,
such as the priming of print heads and evacuating
ink from cartridges just to name a few possible
applications.
The Vacuum
Generator measures only 8”x4”x1.5” (L x W x H) and
does not require electricity to operate. The vacuum
generator requires an air compressor that produces
at least 16 psi of air pressure.
Company Information:
R-JetTek was founded In 1989.
Inkjet cartridge remanufacturers in over 100
countries have trusted R-JetTek to provide them with
their clips, tape, boxes, labels, and other
supplies, equipment and OCP ink for more than 2
decades. If you remanufacture inkjet cartridges you
can depend on R-JetTek to be your single source
supplier. R-JetTek distributes OCP ink which is
used by the 4 largest remanufacturers and the three
largest inkjet franchise groups in the world. Call
R-JetTek today and do business with the Leader in
Inkjet Technology Solutions. 800-688-0129;
begin_of_the_skype_highlighting800-688-0129 end_of_the_skype_highlighting
ext. 116 (Español ext. 115) R-JetTek is
headquartered in Colorado Springs, CO.
www.rjettek.com
sales@rjettek.com